What Drive?
#201
Registered
Joined: Apr 2009
Posts: 1,852
Likes: 1
From: Denmark and hopefully some place nice
I think it's about 32-35 k a piece, including Hering prop and install ect. Contact Rik @ Arneson, he's the guy and he's on OSO as well.
This has been up a million times before, I suggest you do a search. I'd also suggest you'll start another thread about this, since it most likely will kick up a sh!t storm. Just to avoid getting the thread off topic.
Planning to do a conversion?
This has been up a million times before, I suggest you do a search. I'd also suggest you'll start another thread about this, since it most likely will kick up a sh!t storm. Just to avoid getting the thread off topic.
Planning to do a conversion?
Last edited by A.O. Razor; 10-21-2011 at 06:52 AM.
#202
Thread Starter
Registered

Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
#203
#205
Thread Starter
Registered

Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
#206
Looks like you are having fun!!
__________________
Arneson Surface Drives www.arneson-industries.com
Arneson Surface Drives www.arneson-industries.com
#207
I may have missed it but: you went into this project looking at building motors to gain more speed and through advice on the board, choose this upgrade instead (smart move IMO). What have you found in speed gains at WOT and cruise?
#208
Thread Starter
Registered

Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
My weak link is now the engines. Those darn Arnesons!
#209
Thread Starter
Registered

Joined: Feb 2006
Posts: 793
Likes: 59
From: Sandusky/Olmsted Falls, OH
#210




