What is the best tool to cut speaker openings?
11-02-2014 | 11:37 AM
#4
Registered
Joined: Mar 2002
Posts: 2,142
Likes: 3
From: Miami Beach
11-02-2014 | 12:05 PM
#5
Banned
Joined: Jul 2011
Posts: 9,594
Likes: 45
From: Ft. Worth TX
Dremel Trio with the guilde adaptor to make a perfect circles. Depending on location and room to use it. Done a bunch of them with it, I will add..
You can also buy the correct size hole saws as well but they can get expensive, the bigger diameter the more they cost.
You can also buy the correct size hole saws as well but they can get expensive, the bigger diameter the more they cost.
Last edited by BUP; 11-02-2014 at 12:10 PM.
11-02-2014 | 06:42 PM
#10
Registered
Joined: May 2014
Posts: 1,053
Likes: 0
From: Buffalo, NY
I use a single armed adjustable hole saw. I cut a piece of wood to span the opening from the inside. Then I find the center and mark it. I center the hole saw on the X and go to town.
20 years of audio experience has taught me that tip. A perfect hole every time.
20 years of audio experience has taught me that tip. A perfect hole every time.
