First Run ....Not So Good
#43
Charter Member#568
Charter Member
I have three rect. heads. Currently located near Cleve. Ohio. They have been magnafluxed.
__________________
Straight bottoms and flat decks
Straight bottoms and flat decks
#45
Registered
Join Date: Oct 2000
Location: Ontario,Canada
Posts: 1,376
Likes: 0
Received 0 Likes
on
0 Posts
I may have 4 rec port heads off a 420 hp complete with crane gold rockers will need valve job but no cracks. I will know on monday. I live 5 min from Pt. Huron MI. in Sarnia Ontario. Andy
#47
**UPDATE**
Pulled the pan on the motor i thought was sick and sure enough. The banging around was the rod. Number 8 cylinder the piston broke at the wristpin. The rod is still connected to the crank and was banging in the cylinder. I think the block is also cracked. I drained a gallon of water out of the pan before oil came out Any way i am glad i found it was the motor and not the trans or drive.
Pulled the pan on the motor i thought was sick and sure enough. The banging around was the rod. Number 8 cylinder the piston broke at the wristpin. The rod is still connected to the crank and was banging in the cylinder. I think the block is also cracked. I drained a gallon of water out of the pan before oil came out Any way i am glad i found it was the motor and not the trans or drive.
#49
Registered
Join Date: Feb 2003
Location: Traverse City, Mi
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Jeremy,
You may have already saw this in the classifieds,
http://www.offshoreonlyclassifieds.c...o19764-en.html
I have delt with Lenny before and had good experiences.
You may have already saw this in the classifieds,
http://www.offshoreonlyclassifieds.c...o19764-en.html
I have delt with Lenny before and had good experiences.
#50
Registered
Lenny is a very good friend of my frind Chuck (scarabchuck)
built him a killer 540 that makes his scarab go 82mph
adn does all the machine work for Chuck and other Detroit area go fast guys
Ramb
built him a killer 540 that makes his scarab go 82mph
adn does all the machine work for Chuck and other Detroit area go fast guys
Ramb