my engine builder sets my timing on my motors and never had had timing troubles in the 15yrs I used him, it should be set on the dyno for how they want it to run in the boat and all you should have to do is set your idle and sometimes rejet. and Bill has user awareness be real. I know that warning lights work real well on boats when you have a ton of gauges cause if yor going 80 or 180 you can't look and study every gauge but red lights!!! your eyes pick up quick and can save you from sinking to loosing a motor. more engine builders should tell there customers to use them I think. well good luck Bill that paint came out great

my engine builder sets my timing on my motors and never had had timing troubles in the 15yrs I used him, it should be set on the dyno for how they want it to run in the boat and all you should have to do is set your idle and sometimes rejet



*** Thanks ARTIE and a very good point you make , my phone rings off the hook all day over these 2 threads and have recvd calls from at least 6 well known engine bldrs from OSO and every one of them has stated BIG CHIEF HEADS are known for small combustion chambers & they do not like more then 26,27,28 Degree timing maximum and there motors timing is set and marked for identification so they can tell if timing has been moved ... Mine came in sealed crates for LARRYS ENGINE & MARINE with a note that said DO NOT RUN motor AT 34 degrees reset to 32 degrees .... HOW MANY ENGINE BLDRS send motors out the door for customers to set themselves ???

phuck head no that meant that you turned on bill in a second oh buddy buddy, you were his friend one minute and then turned on him azz and you can come here I will pick you up at the airport azzhole, since your so rich and better then us non skater owners. I never threaten anyone on here, but you can come here call me a p@ssy and I always let the other guy swing 1st I have a very hard head that way I am just defending myself see what happens bro!!! it won't cost you more than a couple 100 to come here, already invited one smart azz I even waited at the airport for him never showed. and spelling yours is not spot on anymore than mine as I was saying if I SAID TO A FRIEND HEY USE JIM RIED TO BUILD YOUR MOTORS my old builder who is a fine one at that. and they blew up I would not call the guy I invited to stay at my place for week to party a azzhole and dum phuck like you did to Bill you phucked a friend thats having problems with a builder you use you stab Bill in the back aka watch your back . that is not a threat moron so yah get it now I don't come on here to threaten people. I get enough practice right here in brockton, I come on here to talk help people if I can . your builder phucked up 1st with the shipping then the timing why would a builder set timing at 34 degrees and ship it. you set it at what it should be in the boat or lower NOT HIGHER GET IT

NONE NONE NONE !!!!hey I got to go, need to head to the gym with wife again two days in a row, I need to beat on some weights so I aint getting in trouble later at Doleys pub I need a happy face after reading this bulchit, once again sorry about the pain you are going through and that people who you though were friends are kicking you while your down

I knew a guy who had your problem in high school. He was a good football player but couldn't read or write......the teachers just passed him because he played good ball. Shame what happened to him........

Did the teachers just pass you too?? I can get you a number to call.......no student left behind!!!!!!

[QUOTE=40FlatDeck;2925664]I knew a guy arry who had your problem in high school. He was a good football player but couldn't read or write......the teachers just passed him because he played good ball. Shame what happened to him........

Oh Chit !!!!!!!!!! Let me guess and now he's a ENGINE BLDR in sunny Arizona OH PHUCH ....
Shame what happened to him........
U should of been a circus clown

If the timing is set on the dyno using the Ignition box that is on the dyno it needs to be reverified when it goes in the boat. Usually it will always end up slightly different if you are dynoing with one ignition box and using a different one in the boat. However if the ignition box is the same you dyno'd with, then you should be fine.

[QUOTE=RunninHotRacing158;2925668]It is so easy making fun of you guys..

Anytime you type you give me ammo.

The best part of it is, sometimes I make fun of you and you don't even realize it!!!!!

that's it flag pole after school

HUSTLER just to Clarify all my components were sent to LARRYS ENGINE & MARINE and job built and completed with my MSD boxes,distributors,electronics and shipped back to dress & install ...same way it was ran last 2 years ...200 + hours



They do make some nice CRATES for damage free shipping