VORTECPRO VS Bob Madera/Haxby
#31
Registered
Thread Starter
Join Date: Sep 2011
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Why you got such a hard-on for Madera?? never met him, never did buisness with him... But I have heard nothing but good things about him from many many people for years. In a sport filled with horror stories about douche bags that over promise, over charge and under deliver if not totally rip you off, why phuck with one of the good guys?? It's like dropping a 1075 in your bayliner and calling out bob teague or precious and mongo....
#32
Registered
Join Date: Feb 2001
Location: charlotte nc.
Posts: 1,849
Likes: 0
Received 0 Likes
on
0 Posts
you know what any want a be engine build can make horse power for 5 seconds, our motors run for extended time at high rpm and i don't think you chit will do that . In looking at the other thread you came on stiring you chit had nothing to do with definding your junk. you have done this all over the internet , Bod called you out so put up or shut up simple as that . ou don't get to pick anything except what motor you bring to Fl.
#33
Registered
iTrader: (1)
LOLLLLLLLLLLLLLLLLLLLLLLLLLLL.
==============================
Why don't you go Challenge Shaq for a game on one and one.
Ridiculous ? Not really, as you challenge people and then back out anyway. So it really doesn't matter who you challenge anyway.
Time for you to stop this nonsense.....especially here.
#34
Registered
Thread Starter
Join Date: Sep 2011
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
You wanted a dyno challenge - you got one, then backed down, then you want another challenge.
LOLLLLLLLLLLLLLLLLLLLLLLLLLLL.
==============================
Why don't you go Challenge Shaq for a game on one and one.
Ridiculous ? Not really, as you challenge people and then back out anyway. So it really doesn't matter who you challenge anyway.
Time for you to stop this nonsense.....especially here.
LOLLLLLLLLLLLLLLLLLLLLLLLLLLL.
==============================
Why don't you go Challenge Shaq for a game on one and one.
Ridiculous ? Not really, as you challenge people and then back out anyway. So it really doesn't matter who you challenge anyway.
Time for you to stop this nonsense.....especially here.
#35
Registered
Thread Starter
Join Date: Sep 2011
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
you know what any want a be engine build can make horse power for 5 seconds, our motors run for extended time at high rpm and i don't think you chit will do that . In looking at the other thread you came on stiring you chit had nothing to do with definding your junk. you have done this all over the internet , Bod called you out so put up or shut up simple as that . ou don't get to pick anything except what motor you bring to Fl.
#36
Registered
Called out by Bob Madera/ Haxby to an engine edurance test. Rules: 454 production block, 454 production heads, any thing else goes. Testing procedure: Haxby/Madera will make one HP dyno pull, then run at 6500 RPM for 20 minutes under full load. The water will then be changed and Vortecpro will follow the same test, which ever engine finishes the test will win, if both engines finish the (endurance test) the highest HP will win. Fuel will be 89 octane as speced by Haxby, 10,000 dollars will be held 30 days in advance (prior to the test) by Mike Lewis, winner takes all. The test shall be conducted at Westec in Ca.
#37
Registered
Thread Starter
Join Date: Sep 2011
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
you know what any want a be engine build can make horse power for 5 seconds, our motors run for extended time at high rpm and i don't think you chit will do that . In looking at the other thread you came on stiring you chit had nothing to do with definding your junk. you have done this all over the internet , Bod called you out so put up or shut up simple as that . ou don't get to pick anything except what motor you bring to Fl.
#39
Registered
Join Date: Jun 2010
Location: Rochester, NY
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
Called out by Bob Madera/ Haxby to an engine edurance test. Rules: 454 production block, 454 production heads, any thing else goes. Testing procedure: Haxby/Madera will make one HP dyno pull, then run at 6500 RPM for 20 minutes under full load. The water will then be changed and Vortecpro will follow the same test, which ever engine finishes the test will win, if both engines finish the (endurance test) the highest HP will win. Fuel will be 89 octane as speced by Haxby, 10,000 dollars will be held 30 days in advance (prior to the test) by Mike Lewis, winner takes all. The test shall be conducted at Westec in Ca.
Is your f@cking keyboard stuck??????????????????????????????? you keep posting the EXACT same thing time after time