Dyno correction factor in Colorado
10-02-2011 | 11:04 PM
#182
Registered
Joined: Sep 2006
Posts: 476
Likes: 3
From: brewster ma
Thats the in.used it on Tom.You were smart and Bill was in the hospital.
10-02-2011 | 11:07 PM
#183
Registered
Joined: Sep 2006
Posts: 476
Likes: 3
From: brewster ma
10-02-2011 | 11:26 PM
#184
Registered
Joined: Nov 2008
Posts: 595
Likes: 31
Are you reading what you are posting? No reputable company in this industry wants to deal with you. When you go to PRI, (or "claim" to go to PRI), no one seems to be able to find you. If you really think that AFR is going to associate with you over a real builder, you are in sadly mistaken. and for that matter, no WD is going to drop a customer because you dropped his name. These places laugh when they are called and your name is mentioned, or they say they have never heard of you.
10-02-2011 | 11:31 PM
#185
Registered
Joined: Nov 2008
Posts: 595
Likes: 31
B2B's build was brought up. I supplied the cam and many other parts for that build then I was persecuted over after it dropped valve after 27 hours. Some accused me of covering up a lifter issue, but after Todd posted pictures of the lifter then that accuzation was out the door.
10-03-2011 | 11:01 AM
#187
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Its funny you imply someone was porting them.Thats great,but a news flash.Bill was recovering from surgury.So he's out.Maybe his fill in or maybe the real incident was "you" said Bill was talking chit about the heads.John and Tom talked and figured it out.
Just talked to Bill,he said nice try.He did say he liked how you asked speedtalk forum for help picking the cam for the sb2.2 motor.You never did get an answer or pick the cam for that engine either.
Just talked to Bill,he said nice try.He did say he liked how you asked speedtalk forum for help picking the cam for the sb2.2 motor.You never did get an answer or pick the cam for that engine either.
Please tell me in this thread where I am asking for help with a SB 2.2 camshaft....
http://www.speedtalk.com/forum/viewt...SB2.2+Camshaft
10-03-2011 | 11:04 AM
#188
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Are you reading what you are posting? No reputable company in this industry wants to deal with you. When you go to PRI, (or "claim" to go to PRI), no one seems to be able to find you. If you really think that AFR is going to associate with you over a real builder, you are in sadly mistaken. and for that matter, no WD is going to drop a customer because you dropped his name. These places laugh when they are called and your name is mentioned, or they say they have never heard of you.
I will also "claim" to go to IMIS show this year also. I will be there the 7th through the 10th.
At PRI several of us will be meeting Wednesday nite at the Red Lobster. CNC Blocks, 3V Performance, Mike Lewis, GS Products, and myself. You are welcome to join us.
10-03-2011 | 11:53 AM
#189
Registered
Joined: Oct 2005
Posts: 300
Likes: 60
From: Boston MA
Custom Cams
Custom Cams
Camshafts started out as a fascination with Chris while in school. From there it evolved into a hobby helping engine builder customers with camshaft selection. At this point success cam early and more and more customers were calling for camshafts. Now fast forward 13 years and Custom Camshafts are what Chris Straub is known for.
My “recipe” for making power can be summed up in one word. . .Combination. Each and every engine build is a selection of parts that need to work in unison to make power. Proper selection of these parts matched to the right camshaft makes for a winning COMBINATION.
Straub Technologies will work with inviduals, engine builders, or companies in designing the right camshaft for the combination. Each cam is based on the goals of the customer. Chris Straub will work one on one with you to optimize the package and get you the power that you need.
For custom cams please call us at 423 854 0007.
this is off your website,, you have to be kidding me,,,if you pick a cam for a customer and there boat goes slower,, did it make more power? again do the right thing for starters..pay back everyone who you screwed there engine up with your backward cams and lifters admit you made mistakes and rebuild your name bc this is never going away
Custom Cams
Camshafts started out as a fascination with Chris while in school. From there it evolved into a hobby helping engine builder customers with camshaft selection. At this point success cam early and more and more customers were calling for camshafts. Now fast forward 13 years and Custom Camshafts are what Chris Straub is known for.
My “recipe” for making power can be summed up in one word. . .Combination. Each and every engine build is a selection of parts that need to work in unison to make power. Proper selection of these parts matched to the right camshaft makes for a winning COMBINATION.
Straub Technologies will work with inviduals, engine builders, or companies in designing the right camshaft for the combination. Each cam is based on the goals of the customer. Chris Straub will work one on one with you to optimize the package and get you the power that you need.
For custom cams please call us at 423 854 0007.
this is off your website,, you have to be kidding me,,,if you pick a cam for a customer and there boat goes slower,, did it make more power? again do the right thing for starters..pay back everyone who you screwed there engine up with your backward cams and lifters admit you made mistakes and rebuild your name bc this is never going away
10-03-2011 | 11:58 AM
#190
Banned
Joined: Jan 2005
Posts: 648
Likes: 0
From: Tri-Cities, TN
Custom Cams
Custom Cams
Camshafts started out as a fascination with Chris while in school. From there it evolved into a hobby helping engine builder customers with camshaft selection. At this point success cam early and more and more customers were calling for camshafts. Now fast forward 13 years and Custom Camshafts are what Chris Straub is known for.
My “recipe” for making power can be summed up in one word. . .Combination. Each and every engine build is a selection of parts that need to work in unison to make power. Proper selection of these parts matched to the right camshaft makes for a winning COMBINATION.
Straub Technologies will work with inviduals, engine builders, or companies in designing the right camshaft for the combination. Each cam is based on the goals of the customer. Chris Straub will work one on one with you to optimize the package and get you the power that you need.
For custom cams please call us at 423 854 0007.
this is off your website,, you have to be kidding me,,,if you pick a cam for a customer and there boat goes slower,, did it make more power? again do the right thing for starters..pay back everyone who you screwed there engine up with your backward cams and lifters admit you made mistakes and rebuild your name bc this is never going away
Custom Cams
Camshafts started out as a fascination with Chris while in school. From there it evolved into a hobby helping engine builder customers with camshaft selection. At this point success cam early and more and more customers were calling for camshafts. Now fast forward 13 years and Custom Camshafts are what Chris Straub is known for.
My “recipe” for making power can be summed up in one word. . .Combination. Each and every engine build is a selection of parts that need to work in unison to make power. Proper selection of these parts matched to the right camshaft makes for a winning COMBINATION.
Straub Technologies will work with inviduals, engine builders, or companies in designing the right camshaft for the combination. Each cam is based on the goals of the customer. Chris Straub will work one on one with you to optimize the package and get you the power that you need.
For custom cams please call us at 423 854 0007.
this is off your website,, you have to be kidding me,,,if you pick a cam for a customer and there boat goes slower,, did it make more power? again do the right thing for starters..pay back everyone who you screwed there engine up with your backward cams and lifters admit you made mistakes and rebuild your name bc this is never going away
It can't be to bad. I have 6 custom camshafts to do today. 2 are referrals and out of the 6, 2 are marine with one of those being a referral.
Please let me know what lifters had issues. I can sell Morel, Isky, and GS.
