AFR 325 flow sheets.... anyone ever flow these heads?
04-17-2017 | 09:09 PM
#712
Thread Starter
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
04-18-2017 | 10:32 AM
#713
Registered
Joined: Feb 2009
Posts: 8,356
Likes: 1,515
From: NW Michigan
was not too hard of a decision, 6 of the 7 people were same duration within 1 degree and same LSA, 4 had EXACT same lift, and others were very close, now if I had HUGE differences then it would have been hard... might have to go see Joes cam thread and see who actually won..
Btw I understand the rough winter and other issues. There's a lot of that going on everywhere. Let's hope this will be our and all of OSO's year of good things to happen. Personally and on the water. Cheers.
Last edited by getrdunn; 04-18-2017 at 10:35 AM.
04-18-2017 | 10:35 AM
#714
Thread Starter
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Thx bud, I am hoping to finish up cabin work and get it out this weekend for a run , may or may not go WOT, depends how I feel... knowing myself though I will....
That's good. It can get aggravating but at least you have a good team on your side. lets keep that 5,850 number in mind. I'm excited for you and can't wait to hear how it performs. Hopefully your able to do a trial run soon. Many of us here want the best for you so giver he// and let's see what happens. Good luck.
04-23-2017 | 12:56 PM
#717
Registered
Joined: Nov 2003
Posts: 190
Likes: 2
From: Annapolis, Md
Wishing you the best of luck this season Tim.
Now, for all those who have been following along, whether helping or hurting, and since the motors didn't go on the dyno - just for ****s and giggles - does anyone want to put a number down for Tims new max top rpm in boat?
I'm taking 5,400rpm, and hoping someone else wins. Anyone? Winner gets, well, what ever Tim thinks they deserve, lol....
Now, for all those who have been following along, whether helping or hurting, and since the motors didn't go on the dyno - just for ****s and giggles - does anyone want to put a number down for Tims new max top rpm in boat?
I'm taking 5,400rpm, and hoping someone else wins. Anyone? Winner gets, well, what ever Tim thinks they deserve, lol....
Last edited by Hang Time 27; 04-23-2017 at 12:59 PM.
04-23-2017 | 04:21 PM
#719
Thread Starter
Gold Member
Joined: Oct 2005
Posts: 11,692
Likes: 217
From: Olmsted Falls,Ohio Marblehead,Oh
Not trimmed same props as last season so far 5500, saw a drop in pilmpressure I think knits sender as I had zero issues before. ... maybe another wot hit on way. Back 5500 will be 73+ if I let god catch up... I can say throttle response is WAY BETTER. Goes to 5500 instantly no trimming at all
