Rebuilt engines in progress
01-05-2005 | 11:23 AM
#111
Registered
Joined: Jan 2001
Posts: 3,140
Likes: 0
From: Holland MI
Re: Rebuilt engines in progress
I asked Dave what cam company he used for those motors and I believe he said they are Crower cams, but I could be mistaken. I didn't ask the specs, not because he wouldn't tell me, but because I run 509's instead of 540's.
ExpressCat39 can probably tell you as they are his engines.
ExpressCat39 can probably tell you as they are his engines.
01-06-2005 | 07:15 PM
#112
Registered
Joined: Oct 2000
Posts: 4,541
Likes: 107
From: Western Michigan
Re: Rebuilt engines in progress
Sutphen/Bill,
Yes, they are 540's. Dave's got another pair of blown 540's to build next with no hype parts and he told me he's going to build them exactly the way he did with the one's pictured on this thread. I think the only thing different is the superchargers are just a hair smaller in size.
Yes, they are 540's. Dave's got another pair of blown 540's to build next with no hype parts and he told me he's going to build them exactly the way he did with the one's pictured on this thread. I think the only thing different is the superchargers are just a hair smaller in size.
01-07-2005 | 05:34 AM
#114
Thread Starter
Registered
Joined: Nov 2002
Posts: 3,029
Likes: 2
From: Bonita Springs, Florida
Re: Rebuilt engines in progress
The dyno on the second came out essentially the same. Will get pics when they are installed. Should be running and water testing at Spinnaker(TNT) by the 15th.
