Bad Kitty, making things happen.
..
10-08-2025 | 08:10 AM
#204
Registered
Joined: Oct 2000
Posts: 1,514
Likes: 602
From: Lake Ozark, MO USA
We stow them down in the cuddy.. they are kind of big. I would have gotten the smaller size if I were to do it again.
Did the fall run, besides a shredded belt and on the last day heading to the launch a broken sea strainer cover, we put on almost 200 super fun miles this weekend.
Engines never died a single time during a shift, ran like clockwork.
I`m getting better at figuring out what she likes after some good seat time.
Drives like a dream, I really love the sit down ride on air feeeling .
Fall Run at PBC was a great time as always
Did the fall run, besides a shredded belt and on the last day heading to the launch a broken sea strainer cover, we put on almost 200 super fun miles this weekend.
Engines never died a single time during a shift, ran like clockwork.
I`m getting better at figuring out what she likes after some good seat time.
Drives like a dream, I really love the sit down ride on air feeeling .
Fall Run at PBC was a great time as always
10-14-2025 | 10:01 AM
#209
Registered
Joined: Jun 2005
Posts: 8,407
Likes: 797
From: Central IL
11-10-2025 | 09:59 PM
#210
Thread Starter
Registered
Joined: Jun 2009
Posts: 9,980
Likes: 6,477
From: Chicago
Boat was down by HP Mafia getting a crank sensor issue fixed.
Anthony took it out and got 135mph with 16.5x34x18 props. 1.24 gear
I sent him 16.75x37x15
He ran those to 145mph at 5700 and 9psi. ...
Going to try 16.75x36x18 next year. Even thou it`ll be 60s this weekend .. but I`d have to rewinterize. The engines were happier at 62-6400.. the 37`s would be much easier on the engines with a 1.36 gear. I`d rather have more rpm and less load .
Anthony took it out and got 135mph with 16.5x34x18 props. 1.24 gear
I sent him 16.75x37x15
He ran those to 145mph at 5700 and 9psi. ...
Going to try 16.75x36x18 next year. Even thou it`ll be 60s this weekend .. but I`d have to rewinterize. The engines were happier at 62-6400.. the 37`s would be much easier on the engines with a 1.36 gear. I`d rather have more rpm and less load .
