we arent doing much. maybe head north.

Anyone in milford?
-Mike

I'm about 20 away since I work in New Haven...why, what's up mike?

Guy has a Jeep i was going to look at didnt kno if osme one could do a drive by check the frame fenders and trans crossmember. Didnt want to waste the ride.
-Mike

I live in the town next to Milford, but I can't even change my own oil, so I'm not sure I would be your guy! I'll be out of town the rest of the week anyways.

Mike, Milford is about 40 min. past me. If you want I can take a look at it Sat AM for you, or we can take a look at it Sunday if you'd like.

Mike, those look like expensive parts in your avitar!

Kev OBX Puke Tanks 80 a pop cheap money for a solid aluminum 6 port an fitting tank. 2.5 qts capacity.
-Mike

Have they been installed? would love to see pics of the progress.

Mike,
Sorry I was in the process of getting stuck in traffic last night when you called. Now that I see the tanks in your avatar, I see what you're saying. Obviously those aren't puke tanks, they are dry sump tanks. If I'm correct, they are standing upside down in your avatar pic. If so, the actual top of the tank should have some type of threaded fill/cap. What you'll want to do is machine the cap and fit a 1" OD pipe coming out through the top of it. At the end of this 1" pipe you'll want to fasten a K&N crankcase breather to the top of it. You can pick those up for around $20 each. Presto, a high capacity puke tank. You may have to plug a port or two in the tank (depending how it's configured), but it should work great.