|
Looks Great! Can't wait to see her on the race course!
Bob G. 606 Lock'd Up Bandit |
you guys plan on doing the race in new york city this summer? i was thinking about going down for the weekend and watching it on my boat. you guys did a incredible job. that thing looks insane!!
|
Really coming along nicely.
It's good to see one done right. |
Originally Posted by scarab63
(Post 3634392)
187, 504, 617, 1040.....whatever cops with their codes.
My lawyers a mean b`itch so they can SMD!!!! Theres a code for em!!! Johnny...well see ya in a couple, months!!! Well b there, I hope? She'll b done |
Mike you need power for that biotch? Have one going together now that should be around 600+ that would be perfect for 6.
havent heard from ya so I assume your all set on paperwork? |
Originally Posted by fantastixvoyage
(Post 3636099)
Mike you need power for that biotch? Have one going together now that should be around 600+ that would be perfect for 6.
havent heard from ya so I assume your all set on paperwork? |
88...plan on hittin all opa races
Neil....think im good, ill text u. Thx |
Originally Posted by scarab63
(Post 3634055)
Ok, so heres the deal.
Got back from nc went to drag the boat about 30 miles to adpro to do the graphics & this c0ck state trooper pulls me over. Doesnt like that I have my trailer registered as ” homemade” which I always reg all trailers that way, because mass is such a pain to reg anything. Then he says the trailers ” not homemade” and runs the vins which come back legit. Then he doesnt like the registered gvw of the trailer. Arrrrggg Then walks around the boat & notices no hin tag, which I have in the truck & show him & also explain its off due to fresh paint. Decided to put my baby in impound for 3 days!!!! All set now. Ill be going to maine to reg this trailer & cant wait to see my new buddy on the road. |
Originally Posted by slpcamaross97
(Post 3636469)
Was their a original HIN number under the NLO HIN?
|
Originally Posted by OCCJoe
(Post 3636486)
I couldn't read it well And the transom was in too good of shape to dig into .
PP could never recall the boat. I was hoping you found the good info. OH well. |
Originally Posted by OCCJoe
(Post 3636115)
Did you get my PM ?
|
Originally Posted by scarab63
(Post 3636194)
88...plan on hittin all opa races
Neil....think im good, ill text u. Thx Sounds good, keep me posted. Have yet another motor going together that will likely be going to dyno in a few weeks. Delayed a bit as the cam I had picked out was on a 112 and since I'll be selling the motor a 114 will be marketable. The 112 would make a great race cam for ya with the right (dry) exhaust. Then again dry is the only way to go on a boat like yours anyways!!! |
You have a lot of $hit.
Yes itll have drys |
HI Mike,
The boat looks great ! I am glad the Pantera logo files I sent you last week worked out for you. I hope you kick azz with it this year. If we can help you with anything else please feel free to call or email me anytime. Regards, JO |
Got the shirts yesterday, they look great.
|
Originally Posted by rchevelle71
(Post 3640075)
Got the shirts yesterday, they look great.
Thanks rick!!!!! Plenty more left if anybodies interested. MD |
Originally Posted by JO - PANTERABOATS
(Post 3639719)
HI Mike,
The boat looks great ! I am glad the Pantera logo files I sent you last week worked out for you. I hope you kick azz with it this year. If we can help you with anything else please feel free to call or email me anytime. Regards, JO Let me know when your shirts are in too. MD |
We just got the shirts today. They look very nice !
Thanks, JO |
Shirts?.....What's my name Skip?
|
Originally Posted by jdub
(Post 3640573)
Shirts?.....What's my name Skip?
Dude, I was thinking that first thing this am.....doh....u got the shaft again!!!! Ill mail it tomorrow |
Who do I send money to so I can get a shirt.
|
Pm me your address
|
As lil red ( jamie ) said pm him your info, or pm me your info, or call me or text me the info@
508 8 six three 9668 Looking like $25 gets em to your door. Thanks all, mike d We've got.... m, l, & xl We'll be getting some more big boy sizes next week.....2x, 3x |
Originally Posted by scarab63
(Post 3640578)
Haaaaaa
Dude, I was thinking that first thing this am.....doh....u got the shaft again!!!! Ill mail it tomorrow |
Teeee shirt time....thanks Mike
|
Originally Posted by jdub
(Post 3646402)
teeee shirt time....thanks mike
|
[QUOTE=jdub;3646402]Teeee shirt time...
No prob skiptuation |
3 Attachment(s)
Attachment 471394
Attachment 471395 Attachment 471396 1.Cut the hole using this handy jig. Went conservative @ 17” X. Decided to keep it a bit lower, may sacrifice a couple mph, but dont want the prop blowing out in a hard corner racing etc..... 2. Once the holes cut, put some resin in to preserve the hole. 3. HP gimbal assy |
2 Attachment(s)
Attachment 471405
Attachment 471406 Motor`s in & aligned. Dart 454, dart heads, 177 blower, not dynoed, but maybe 550 hp ? Bit higher comp than a stock merc motor. |
|
Originally Posted by Biggus
(Post 3648832)
Looking good! How think is the transom at the cut-out?
We were worried about the gimbal studs going all the way through due to the meat of this transom. But worked out fine. Not much threads to spare though. MD |
2.75"
|
Wicked cool . Keep slaving away.
|
Originally Posted by lil red
(Post 3648842)
2.75"
With the transom 2.75" you've lost .5" of input shaft engagement engagement. =Don't aske me how I know...had this issue years ago with a TRS boat. stripped out the splines in short time... Sorry to be the bearer of bad news but check the engagement. I had extended spline shafts made. Kurt |
Originally Posted by scarab63
(Post 3648816)
Attachment 471394
Attachment 471395 Attachment 471396 1.Cut the hole using this handy jig. Went conservative @ 17” X. Decided to keep it a bit lower, may sacrifice a couple mph, but dont want the prop blowing out in a hard corner racing etc..... 2. Once the holes cut, put some resin in to preserve the hole. 3. HP gimbal assy |
Originally Posted by Biggus
(Post 3648890)
I thought it looked extra thick. Industry standard is 2.25" when you make it thicker, you lose input shaft engagement into the coupler.
With the transom 2.75" you've lost .5" of input shaft engagement engagement. =Don't aske me how I know...had this issue years ago with a TRS boat. stripped out the splines in short time... Sorry to be the bearer of bad news but check the engagement. I had extended spline shafts made. Kurt |
Whats the status? You figure out your steering?
|
Making headway.
Steering is for sale in swap. Ordering imco system from teauge, rams mount 6.75” off gimbal |
Hows Combat Zone comming along? I forgot when the race is.......but isnt it comming up and will it be televised? Recent pic's? Jaime
|
Sold it
|
| All times are GMT -5. The time now is 09:38 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.