Flywheel Bellhousing on 24'
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Sep 2003
Location: Mountain City TN
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Flywheel Bellhousing on 24'
While do some cleaning in my engine compartment on my 24' I noticed that my flywheel bellhousing has cracked on both sides, (approximately 1/8 " Crack) The rear motor mount bolts are tight, My 24 has a 496 HO MAG / Bravo Drive. Anyone come across this before? I also see that IMCO now has a Flywheel Bellhousing that is reinforced in all critical areas. Mercrusiser vs IMCO part? Jeff