Powerplay 38 Hull glass placement You can see how nice this goes together no scissors needed the patterns were good.

Powerplay 38 Hull Lamination Dave take a look at the roller how cleanly it works.

Powerplay 38 Deck Mold Spray up

Powerplay 38 Deck Mold Spray up, I used a 2 Quart pot rig on this and everything else there and the boys had to hustle to keep me in front of the gel line chasing us, it was warm and I was a little over 2% MEKP .

Powerplay 38 Deck Mold Spray up ,my Brothers batching and they had a couple tricks for keeping the system going.

Powerplay 38 Deck plug at Mollicam facilities.

Powerplay 38 Hull Mold Clean up and Wax started.

I was noticing that, looks good. I like to see that sheen across the laminate that shows a good balance. What would you recommend these days for a fed roller system? Are there any specific brands you like over the others?

Mollicam still uses one of your decks in their add in Pro Boat Builder. I think its the Apache deck.

Powerplay 38 Hull Mold, I finished the polishing and it is now ready for wax I have a 5 step buffing system