ragman

Thankyou for the nice comments

Thank you for your to kind comments

Or as we say in Sweden: Tack för dina snälla kommentarer

ragman

A quick test to see if everything fits and also to make a quick template for the motor mounts
[ATTACH=CONFIG]511477[/ATTACH] [ATTACH=CONFIG]511478[/ATTACH]

It’s kind of a tight fit but it will work fine
[ATTACH=CONFIG]511479[/ATTACH] [ATTACH=CONFIG]511480[/ATTACH]

Finally a "quick and dirty" template for the motor mounts
[ATTACH=CONFIG]511481[/ATTACH]

Sunrocket24

iTrader: (1)

Wow you guys sure are making great progress and not wasting any time!!

ragman

You’re to kind; all of these pics are taken over a couple of years. So we are not making that good progress as it is a hobby project. So most of the time there’s just a few hours after work here and there we have time to put it together.

The plan is to be ready for launch next summer

ragman

A few pictures from when we tried out the mockup motor mounts

Moving the boat from our painting facilities to the workshop on a nice wintery day Kind of strange that I miss the winter season
[ATTACH=CONFIG]511499[/ATTACH] [ATTACH=CONFIG]511500[/ATTACH]

Inside our workshop
[ATTACH=CONFIG]511501[/ATTACH] [ATTACH=CONFIG]511502[/ATTACH]

ragman

Again a tight fit but it will work
[ATTACH=CONFIG]511506[/ATTACH] [ATTACH=CONFIG]511507[/ATTACH]

[ATTACH=CONFIG]511505[/ATTACH]

ragman

Some pics from the installation of the stand off boxes and steering
[ATTACH=CONFIG]511635[/ATTACH] [ATTACH=CONFIG]511636[/ATTACH]

[ATTACH=CONFIG]511637[/ATTACH] [ATTACH=CONFIG]511638[/ATTACH]

ragman

Just a mini update

I am having trouble to come up wirh a design for the instrumentation
This is the second version of the "panels"
[ATTACH=CONFIG]511656[/ATTACH]

ragman

Installed trim tabs from Dana
[ATTACH=CONFIG]511793[/ATTACH]

ragman

We have also manufactured a pair of water pump covers
[ATTACH=CONFIG]511794[/ATTACH]