So whats next for the dubster ? Esp. since you will probably still beat us both to the water.. Do I have an idea whats sitting or heading to your driveway ?? C'mon this section is Way to quite to hold out on..

a 1071 572 rollerset up 6500rpm or so big headers it should be 1050 hp or more on pump gas, then a pulley change race gas for kilos :evilb: art

whats new heard your not using your gas tanks??:eek:I should have my motor late dec ,jan,I am getting ready to fill 4'' of the cut out and 2 sets of exhaust holes. we are setting the drive at 3'' or 17 1/2'' X. the konrad likes to be 3'' or higher but the higher set ups have been notched and stepped hulls at 2''. my friends 31 sutphen straight hull no step or notch was set at 4 3/8'' with regular merc lower and its fine to 92 is where he has gotten it. he is shooting for a 100 plus. I hope I just get by in my 88 hull to his 05 hull haha. but he was running 900hp at 92 new bigger blower will be 1000 to 1200 I figure so its going to be fun to see who handles better at 100 plus.

I havn't been around the forums much latley but I must have missed something b/c I didn't know I changed plans & wasn't using my fuel tanks ?? I don't have much to update on mine as other priorities have it trumped at the current time..

Sounds like yours is getting ready to move along though..

Haaaa...you must have missed the humor in my statement Artie. When I said Scotty isn't going to use his tanks I meant he'll never finish the boat :lolhit: Hell you could run his tanks for a couple seasons before he'll be ready for them....sorry Scotty had to do it :kiss: Haven't heard from you in a while ....everything good?

I missed that entire thread.. Haha..:lolhit: I found it though smarty pants..:kiss:

All is well here, however a full plate would be a major understatement for me at the current time.. I so want to see that yellow sled in the water and if I got it all togather in the nxt. month I would splash it 25-30 degrees or not !! I would bust ice like the deadliest catch boys do I wouldn't care..

So since I've been MIA what kind of john boat did you buy this go around ?? Don't act like you're just surfing around for entertainment we all know you have the same nasty addiction I should kick !!

Look up :grinser010:

Scott,
I didn't want to start my own thread but wasn't there someone that had come up with a new Saber Graphic to use?? I'd like to get a tag for the front of my truck..
Something like
SABER POWERBOATS
HARDCORE-OLD SCHOOL
Any other ideas??

I think Mitcher-T did the latest logo but If your not looking for a "specific" font & just want a cool looking tag I can make you one. What colors did you have in mind ??

I did the latest Saber graphic logo and I have it vectored for use on a vinyl cutting machine. You're welcome to call me and i'll figure out what you need and help you out.

Mitcher T.
269-795-2228