28 Saber Wanted
07-24-2025 | 08:27 PM
#121
Registered
Joined: Aug 2002
Posts: 1,256
Likes: 273
From: jenison mi
Ok, so lets just say, I am bored today, my post is just in my opinion, and could definitely not be accurate, but here is my 2 cents.
The mold is the same for both the cyclone and offshore.
The "cyclone " badge was created for twin engine boats, exceeding 1000 hp.
If you look at the yellow boat for sale, on classifieds, you will see it is "Offshore" as that boat originally had twin 7.4,s.
There is most likely exceptions, but if you look deep enough I would bet, as some point there was a power replacement.
The mold is the same for both the cyclone and offshore.
The "cyclone " badge was created for twin engine boats, exceeding 1000 hp.
If you look at the yellow boat for sale, on classifieds, you will see it is "Offshore" as that boat originally had twin 7.4,s.
There is most likely exceptions, but if you look deep enough I would bet, as some point there was a power replacement.
07-24-2025 | 08:35 PM
#122
Registered
Joined: Aug 2002
Posts: 1,256
Likes: 273
From: jenison mi
not correct, early boats are narrower at the sides where they meet the bottom. mold was redone and that area is wider. deck mold never changed. the cyclone edition was simply twin engine boat that they promised would go 85 mph for 85k. they used 500hp's to do this.
07-25-2025 | 07:56 AM
#123
Registered
Joined: Feb 2002
Posts: 45
Likes: 10
From: Rockford, Mi.
All and all, no matter, love my boat, and really love both your boats and hoping to see you on the water. Wish there was a Saber Day on Muskegon Lake, or anywhere. I have never had the pleasure of attending one.
