38kv performance questions
09-22-2021, 11:17 PM
#71
Registered
Thread Starter
12-02-2021, 01:50 PM
#72
Registered
Thread Starter
Been awhile since I touched the boat, this is more that parts were in the way and needed to move so I threw all the interior parts in and surprisingly most everything fit haha. The seat needs a little massaging but for the first time mocking everyone up I love the way it looks! The new aluminum seat frame is nearly 40lbs lighter than the old plywood pos. I can’t remember the weight difference on the panels but it’s all really light in comparison. If I can find some more time I want to get the swim deck fit up and mounted.
Old seat frame
Old seat frame
The following 2 users liked this post by Nocoast:
hogie roll (02-22-2023), larslindroth (12-03-2021)
Platinum Member
The following users liked this post:
Nocoast (12-02-2021)
12-02-2021, 04:59 PM
#75
Registered
Thread Starter
Don’t mind the dirt, got the exhaust back on with the new aluminum trim pieces I made, ditched the 3/8” stainless for 3/16” aluminum. Trying to shave a little everywhere I can, 8lb loss. Swim deck up next
The following 3 users liked this post by Nocoast:
VIP Member
