![]() |
4 Attachment(s)
pics from the visit to XtremeRacingCats in Miami last week:
|
5 Attachment(s)
pics from Ocean Outboard (O O)
SAW gettin' cleaned |
Rick, thanks for all of your help.
You da man! |
Noli- does that mean she is ready to run!
|
Those are some big azzz motors Noli. She should definitely move with those!
|
Rick, I agree
Can't wait to complete the interior and run SAW :) possibly in the September/October time frame |
2 Attachment(s)
converted the single-roller suuport at the winch to a dual support v-form at the winch today.
This will give better support when trailering SAW34 longer distances. |
Originally Posted by elvisali
(Post 3176158)
Noli- does that mean she is ready to run!
Sean, SAW34 has been ready, but I really would like to have a run after the interior has been completed, or at least the two front bolsters :) Currently the SB logos are in design stage and the bolster stands are being streched 9 inches from PPI. Will post some pics as soon as... How was the run today. such a nice day huh? |
noli, your avatar shows the Jersey Shore as your location. Where are you located ??
|
I am located in the Princeton area, but SAW will be shooting out of Manasquan River :)
|
I am located in the Princeton area, but SAW will be shooting out of Manasquan River on the Jersey Shore :)
|
noli, whats going with your boat ??? Any updates !?!?
|
nol- get that bad boy ready by sept and enter it in the around long island race!
|
Any updates??
|
1 Attachment(s)
Angel & Gary,
Currently concentrating on the interior seats. Just got the printout of the logo from PPI. They had to send it back to the company to re-digitize the design. When the embroidery comes in (suppose to be today) Missy will send me another pic. Here is the digitized version of the Superboat Logo. The base of the bolster seat was stretched 9" to allow for me to see over the boat's windscreen. When that comes back from the metal shoppe, the seat will be completed...that too will be coming in wihtin the next couple of days. Will post pics asap. |
noli, are you looking at a 2010 or a 2011 splash ??
|
.
. it's lookin' more and more like 2011 splash cause after the interior is complete, I will have the electronics installed. this is one son-a-ma slow build ! Next year will be a big year as SAW will try to go to the Bahamas with the Family. First to Bimini (Bimini Big Game Club) then to Nassau and to Paradise Island :) |
2 Attachment(s)
some pics and a map
|
1 Attachment(s)
Missy at PPI pulled thru again and sent me a pic of the new logo embroidered.
the pic is a little dark, but you can see the work that they do. It's set on a carbon seating material awesome! |
Originally Posted by noli
(Post 3206486)
Missy at PPI pulled thru again and sent me a pic of the new logo embroidered.
the pic is a little dark, but you can see the work that they do. It's set on a carbon seating material awesome! |
Sean,
I can't wait either. Will be a nice ride. Soft and quiet for those longer trips. the bolster base bracket is still at the metal shoppe waiting completion. I've asked for heavier foam for the seats for better support for me....I'm pushin' 240 lbs :) |
3 Attachment(s)
The bolsters are almost complete.
Missy sent me some pics...she's awesome! |
Originally Posted by noli
(Post 3220980)
The bolsters are almost complete.
Missy sent me some pics...she's awesome! |
beautiful bolsters Noli
|
Noli, ask them if that bottom/forward piece is whats going to be covered. It doesn't look right.
|
lol :)
that's the piece they're holding open because I've asked for it to have heavier foam to absorb my extra weight :grinser010: |
3 Attachment(s)
Went by Ocean Outboard (OO) today. I took measurements of the back bench area for PPI (ppi-fl.com). And the sides for where the coaming pads would be installed.
OO installed the lower brass plug. |
3 Attachment(s)
Here's SAW getting ready for storage.
|
4 Attachment(s)
Here are the measurements of the coaming pads and rear bench seat.
|
noli, your bolsters look great, your 34' is going to be a Great Looking Boat !!!
|
Looking good!
Is splash expected next spring??:grinser010: |
I will try my hardest to have her launch this coming spring.
|
noli, boat looks real nice !! if you sell, what are you intrested in ??
|
1 Attachment(s)
I'd like to stay with Superboat Inc.
JC indicated that the SUPERBOAT 32 Cat can be made ready. I'd like tripple outboards, unfinished cabin - just carpteting, low-deck. I luv lookin' at this pic: :drink: http://longisland.craigslist.org/boa/2028081396.html |
Originally Posted by noli
(Post 3238481)
I'd like to stay with Superboat Inc.
JC indicated that the SUPERBOAT 32 Cat can be made ready. I'd like tripple outboards, unfinished cabin - just carpteting, low-deck. I luv lookin' at this pic: :drink: |
G,
That's plenty fast for me :) C r a I g s l i s T - l o N g I s l A n D : Superboat 34 |
Noli !! I can't wait any more !! Have them put 50 gallons in each tank. And tell them your testing it without the upholstery.
|
I guess I must be missing something.....You just had this boat done ....and might I add it is very nice!
And you now want to sell it and build a cat instead? Great if that's what you want....but just left me scratching my head. |
Originally Posted by Pantera24
(Post 3240122)
I guess I must be missing something.....You just had this boat done ....and might I add it is very nice!
And you now want to sell it and build a cat instead? Great if that's what you want....but just left me scratching my head. |
Originally Posted by FX10
(Post 3240574)
Gary Asked him "if you were going to sell, what would you get"
Nonetheless not trying to start anything, it was just a question. Noli's 34' is a BEAUTIFUL ride to say the least and I wish I knew it's performance numbers. |
| All times are GMT -5. The time now is 09:00 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.