![]() |
Originally Posted by bigandy
(Post 2168607)
hey we understand, no one called you an idiot.... there are entire websites and forums devoted to drain plugs randomly dropping out!
i think it is listed in mercuiser manual as the single largest cause of engine failure, right behind the caption about watching your guages when operating your boat, and the one about the break in period on new motors before you make three runs in a row.... Thanks for getting your story straight instead of listning to the gossip and drawing your own conclusions. |
Gossip????? everything Lefty says is correct:):)
|
Summer boat show starts at Reliant center on Wed.
I think it runs into next week. I say we go thursday. |
Originally Posted by Trojan-man
(Post 2168529)
By U Boy, no one is going to kick you outa bed for eatin crackers....bring you **** anyway sunday......you will get to the stops first anyway, before all of the antique boats make it there.....:D :drink:
|
Originally Posted by jeff1000man
(Post 2168618)
Ran for over 30 minutes at 2500 rpms going across the lake before we reset the timing and made 3 runs. Engines were all ready broke in from the dyno and the last time we ran the boat.
Thanks for getting your story straight instead of listning to the gossip and drawing your own conclusions. as far as drawing my own conclusions, i drew nothing, i just enjoy kicking you in the di(k while you are down, i dont have any idea what happened, beside you are the one that brought up whos boat hasnt been running not me. i dont start chit i just finish it. Why cant we all just get along.... and pick on shrek. |
Originally Posted by tomtbone1993
(Post 2168549)
He still knows the boat must be bigger than 24 feet, you must be a voted in member. I know we let you slide with the minium 55MPH rule, but I can not streach his boat:):)
|
Originally Posted by BY U BOY
(Post 2168641)
Guess i will not be a member since the boat is at a max 23'
|
Originally Posted by BY U BOY
(Post 2168641)
Guess i will not be a member since the boat is at a max 23'
|
Originally Posted by BY U BOY
(Post 2168641)
Guess i will not be a member since the boat is at a max 23'
|
There have been so many BIPS in the last 5 minutes, I dont even know where to post them...:crazy:
|
Originally Posted by bigandy
(Post 2168637)
30 minutes huh, oh well there are a lot of things in this world that cost $400 a minute, they are usually blond and made mainly of silicon and usually only riden for 3 minutes but what ever makes you happy.
as far as drawing my own conclusions, i drew nothing, i just enjoy kicking you in the di(k while you are down, i dont have any idea what happened, beside you are the one that brought up whos boat hasnt been running not me. i dont start chit i just finish it. Why cant we all just get along.... and pick on shrek. At least I try to fix my chit. You have all of the pieces and you still let it sit there and rot. I think you are scared. |
Originally Posted by tomtbone1993
(Post 2168648)
22 foot with Clear Lake, then you are in both clubs:cool:
|
Originally Posted by tomtbone1993
(Post 2168648)
22 foot with Clear Lake, then you are in both clubs:cool:
|
Originally Posted by Trojan-man
(Post 2168656)
22 foot for the bay and 24 foot for conroe........that makes sense ??? wtf ??:snide:
|
Originally Posted by tomtbone1993
(Post 2168662)
tell me about it...I didn't make the rules
|
Originally Posted by BY U BOY
(Post 2168667)
ok so my boat is a 21'er and with the swim platform it 23' :cool: maybe next summer.
|
Originally Posted by jeff1000man
(Post 2168668)
Quit shrinking it, It is not cold outside.:eek:
|
off to a meeting :(
|
Chad, are you running the Trojan this sunday? I need a stable boat to take video from during the fun run.
I am not sure if Joew is going to be off work early enough. |
Whose gonna be on Conroe Sat???
|
Originally Posted by Beak42
(Post 2168691)
Whose gonna be on Conroe Sat???
|
Sat weather supposed to be good. :evilb:
|
Originally Posted by Beak42
(Post 2168719)
Sat weather supposed to be good. :evilb:
|
Originally Posted by jeff1000man
(Post 2168734)
Are you bringing your boat up?
|
I'm back biatches:D
|
Wholy $hit there are some mutherfockers gettin knocked the fock out! :evilb:
and for the record I haven't said chit about jeff broke tug..... only what he told me. I'm not saying chit bout the self untreading drain plug! :rolleyes: all i know it no-go! RIGHTY TIGHTY........LEFTY LOOSY! my .02! |
WHAT, ARE WE GONNA STOP AT 300 PAGES:p
|
I don't think we'll ever stop.
|
How many of you slackers have told people about Sunday?
hhmmm,hhhmmmmm???? |
Originally Posted by wstultz
(Post 2168933)
How many of you slackers have told people about Sunday?
hhmmm,hhhmmmmm???? WHAT TIME SHOULD WE TELL PEPS? |
Jeff didn't you say you had a 25 bravo 1 i could try?
|
By u, you can tell whomever you want to come up and run. It is a TOPPS function so they can't be in the meeting and they can't officially participate but the more boats the merrier.
|
Originally Posted by BY U BOY
(Post 2168936)
Jeff didn't you say you had a 25 bravo 1 i could try?
|
Originally Posted by jeff1000man
(Post 2168966)
Yeah, I'll dig it out. It is a 3 blade.
|
Originally Posted by BY U BOY
(Post 2168667)
ok so my boat is a 21'er and with the swim platform it 23' :cool: maybe next summer.
|
Originally Posted by jeff1000man
(Post 2168685)
Chad, are you running the Trojan this sunday? I need a stable boat to take video from during the fun run.
I am not sure if Joew is going to be off work early enough. |
Originally Posted by Trojan-man
(Post 2168988)
next summer you will have a cruiser and a hella house note......you can join the sea ray club :evilb: :evilb: :evilb:
|
Originally Posted by jeff1000man
(Post 2168966)
Yeah, I'll dig it out. It is a 3 blade.
:frog: :frog: :frog: |
bam 6000 :p
What motor is in it? |
Originally Posted by Trojan-man
(Post 2168997)
Does anyone else have any props laying around? I need one for the banana, but I don't know what pitch yet ???
:frog: :frog: :frog: |
| All times are GMT -5. The time now is 02:08 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.