Thats seems odd? How the heck could it have bent?

is your shaft bent or does it just point to the right??????

might explain that "tennis elbow" that showed up thirteen years after your last tennis game??????

Well i got the carb jetted and am 1 step closer to getting the hatch done. :cool: just need to pre fit and paint and I'm done..

grinding out for the flame arrestor was a Fu(kin biatch.

or is loose. don't run it intil you have the problem fixed. That is how the 46 Sea Ray I purchased sunk.

I am gonna pull the props off next week and start from there. Mike at Inland marine said the set screws in the coupler were tight, that the vibration grinded the shaft loose, my packing is also leaking, or I should say pissing. What happened to the sea ray?

:p :drool: :drool: :crazy: ....nice, quit sending me porn and maybe my tennis elbow will go away, and so will "Pearl Harbor"

I heard Wstultz is building "Thunderboat Row II "

Now theres an idea. :evilb:

Tom will explain better, when he gets here,, but I believe the shaft bent and some how threw the propeller up through the bottom of the boat. but dont quote me on that.

The packing will always leak. They are made to do that. As far as the Sea Ray the previous owner lost a blade on the prop. Instead of brining it in on one engine. he contiued to run it. It vibrated the shaft bracket loose. Then sent the bracket through the bottom of the boat.

or AKA Living room, Game room, Guest Room, TV Room....ect...ect...

Dramatization, "please note the people in this picture are actors, used to keep the identities of the victims private." :evilb:

does everyone want to leave a little earlier for Tickfaw next Thursday? like a few hours earlier. Maybe meet on the East of Beumont around 5:00PM?

Victims? try dumbazz the whole thing could have been prevented....

YES! i was thinking of leaving houston around 3 or 4.
That would put me in my driveway around 10 or 11 with fuel stops and picking up a buddy.

was that at seabrook beach club? Kinda looks like it.

who all is on the lake today???



























i mean besides me...

looks like we may have some bad weather for the run:(
http://www.weather.com/outlook/drivi...ayLink_driving

Thats what I was thinking,, I dont know if thats the actual boat, or not. Only tom could tell for sure.

I guess this means your boss is going? :D

I can handle that. When you say east of beaumont, where exactly?

Rose City Exit Truck Stop


Yes that is a pic of the Sea Ray I bought and redid. I do not know where it was taken. I found the pic on the web a few years later after I purchased it.

http://www.mapquest.com/maps/map.adp...d%20%26%20Bulk

Im right here, if you zoom out you can see proximity to 1-10.
I have plenty of parking 24/7 security etc. If anyone wanted to leave their car there its fine.

I never knew that,, I saw it a while back when you had just gottent the sea ray, but never thought that was it.

Williams bros after 1 bottle of crown and partying till 6 AM

YEa, Sea brook beach club is a great emergency location,, I can only imagine the brain pool,, "Ohh shytt! We're sinkingg!!!,, head for the bar! I do believe there is a lift no more than 1000ft. from where the decided to go sink. :rolleyes:

I dont think the 18th hole at walden will ever be the same, LOL,, Watch out for that sandtrap,,, oh and the 40' boat on the fairway as well. :p Got to hand it to the captain,, he had the fenders out.

the good thing was it hit bottom so it did not completely sink:rolleyes: also the engines were runnin when she went down. Detroit 6V92's are not made to suck saltwater through the super charrger.....

No,No, Nice shot! Right on the beach.

I'm finally starting to see light from the mountain of work i've been stuck under the last few days........now.......I've got to go back to work.

did you get that boat running?

If he would have stayed out side the marnia he could have kept everything dry in one of many 2-3ft spots I thinks its only a foot deep just past the boat ramp by the bridge. :rolleyes:

alright guys we have been slackin:drink:

no we have been workin.....you will see less of me durning the day....i have to pay for my toys:(

Hell no. The risers just went to polish and should ship next week. All of the parts are in for the engine and the block is prepped, they just need to install it all.:(

Ok, its not quite a project Im willing to take on,, but I may have found out what you can do with those extra engines and drive you have jeff.
http://www.offshoreonlyclassifieds.c...o13260-en.html

sell the out boards to fund your project, the boats been forsale for about a year,so he is probably willing to deal, and then you have a clean bad azz single.
if i had a drive, gimble and engine laying around, I would probably grab it.
:cool:

Im bored as hell,, I have surveyers, appraisers,engineers, and blah blah all out on the plant and they dont want me to over hear them talking, :rolleyes: , so I have to hide out while they do their thing. I have them all on candid camera tho, :D
One just took a leak,,,If only he knew,, he is being fed live and direct through the close circuit camera system. I showed the secretary. heheh

Ok,, I guess I will work to. :crazy:

QUITER:evilb: :drink:

Does this boat look familiar???????

Hmmm,, too bad the girl didnt come with the deal, we woulnt be fixing the engines all the time, :evilb: :evilb: