|
I hear it is. I've been in contact with baywatch
|
Good pictures Jay!
|
Does any one have hatch pics or know clearance. Wondering how much room I have and will need once I put the motors in the boat.
|
Flat recessed hatch. Text you a pic
|
Gonna be close but it might fit with the hats on the inside like my cig had
|
Gordon I'd like to put IC's under the blowers also .
|
They will be tall
|
Going to grab some scoops. So when I get IC's I can bolt on and go. Thinking going meth also. Friend of mine can build them off boost ref. Also if any one knows where to get decals for a window/tail gate please let me know.
|
Little overkill chillers and meth unless your putting a 3" pulley up top. Meth only helps when the tank is full. I don't like the idea of it in a pleasure boat
|
Per scots idea
|
I.C.'s Mike that is a must do NEED em they make engines live, what drives you have or doin?
|
I may have two super chiller intercooler for sale ..Pm me a contect number and get you more infor on them..
|
Mike, Are some chillers taller than others or are they all about the same height? Don't know how critical the height to the hatches will be.
|
To the best of my knowledge you are right, they don't make different size intercoolers heights, they are much the same...But you do need to check the hatch height when closed..
|
Look At The Whipples. I Believe They Only Add An 1 1/2. Where The Superchillers Add 4 Inches. They Also Make Low Profile intakes
|
Whipples are shortest, then blower shop, then lee/super chillers.
|
You can't use a whipple supercharger intercooler on a 8/71-14/71, So, If you change your whole supercharger set up, then you can change your height some what..
|
So you could save 5 to 6 inches overall depending on the setup....interesting. I'm sure dollars and cents comes into play here!
|
Originally Posted by apache17
(Post 4075952)
You can't use a whipple supercharger intercooler on a 8/71-14/71, So, If you change your whole supercharger set up, then you can change your height some what..
They don't???? |
Originally Posted by lil red
(Post 4075989)
http://www.whipplesuperchargers.com/...sp?ProdID=1205
They don't???? |
Originally Posted by J-Bonz
(Post 4065986)
Thats what I was thinking until I looked at some of the pics I had saved...
[ATTACH=CONFIG]517478[/ATTACH][ATTACH=CONFIG]517482[/ATTACH][ATTACH=CONFIG]517481[/ATTACH][ATTACH=CONFIG]517480[/ATTACH][ATTACH=CONFIG]517479[/ATTACH][ATTACH=CONFIG]517474[/ATTACH][ATTACH=CONFIG]517475[/ATTACH][ATTACH=CONFIG]517476[/ATTACH][ATTACH=CONFIG]517477[/ATTACH][ATTACH=CONFIG]517483[/ATTACH] |
Wow, That's a very nice intercooler... I stand corrected .. Did they just come out with this one ??
|
That's the OLD Shooters...the good ole days
|
Not Sure Exactly When They Came Out but IThink They Have Been Out For Some Time
|
I have had my low profile whipple's under my 871 and 1071's since I bought my apache 8 years ago.
|
Originally Posted by Sick Stinger
(Post 4074848)
Does any one have hatch pics or know clearance. Wondering how much room I have and will need once I put the motors in the boat.
http://i706.photobucket.com/albums/w...ect-X002-1.jpghttp://i706.photobucket.com/albums/w...ect-X003-1.jpghttp://i706.photobucket.com/albums/w...ProjectX29.jpg |
Panther cooler? On those motors.
Apache shot me pics and info 7746447882 |
Any thoughts on a carbon hatch? Thinking about going this route
|
I'd be shocked if you could fit IC's and a spark arrester under that flat hatch.
|
Nope can't happen need a hole
|
Originally Posted by Sick Stinger
(Post 4076146)
Panther cooler? On those motors.
It's possible it could be made to fit with whipple low profile coolers and a shorter flame arrestor than I have. I also have about a 1/4" I could cut down on the carb/arrestor spacers. I think the Whippes need 2 more inches than stock? |
Sick Stinger, keep in mind that your motors may be mounted higher due to your twin step vs.Panther's conventional bottom. The 575 SCi's in my '01 single step still have some clearance with the hatch closed.
|
Hess any pics of your boat? So you have the staggered 575? Yellow interior I believed
|
That's true, I don't know where they put the X on the step bottoms. However, raised mine several years ago and my propshaft is now 5 1/2" below the bottom.
http://s706.photobucket.com/user/Fun...sion%20Project |
Sick Stinger, no, I have side by side 575 SCi's.
|
Factory 575? I thought only the stag was 575. Any pics? Thanks for your time appreciate it
|
Panther thankyiuvalso for you time and posts good stuff
|
Sick Stinger, there are (2) 36's with Mercury Racing 575 SCi's. I am not able to post attachments. PM me your email and I will send you some pics.
|
|
What prop? Speed?
|
| All times are GMT -5. The time now is 02:09 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.