rebuilt trans dosn't work?
#1
Registered
Thread Starter
rebuilt trans dosn't work?
I had a local Merc Mechanic rebuild both of my Borg Warner 72-c trannys....put the motors and every thing back together..fired them up today...Starboard works great ...port does NOTHING...FORWARD OR REVERSE...????any suggestions???..I hate to think of pulling the motor again....
#2
Re: rebuilt trans dosn't work?
If you have nothing and the fluid is not being pumped, he may have set the pump up for reverse rotation by accident. Start the motor up and crack a line loose to see if you have any fluid movement in the hoses. You cant really put the shuttle valve together wrong. Usually when the dont work, its the pump housing is clocked wrong.
Sorry for the bad news if thats it. You will have to pull it out.
John S.
Sorry for the bad news if thats it. You will have to pull it out.
John S.
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: rebuilt trans dosn't work?
What he said.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#5
Registered
Thread Starter
Re: rebuilt trans dosn't work?
THANKS GUYS...EXACTLY CORRECT !!!!, PULLED THE MOTOR FRONT COVER WAS 180 degrees off... now I know what you ment by "CLOCKED'' wrong...thanks...Dave
#6
Registered
Re: rebuilt trans dosn't work?
Originally Posted by Scarab3DMC
THANKS GUYS...EXACTLY CORRECT !!!!, PULLED THE MOTOR FRONT COVER WAS 180 degrees off... now I know what you ment by "CLOCKED'' wrong...thanks...Dave
#8
Registered
Thread Starter
Re: rebuilt trans dosn't work?
I installed trans pressure gauges & senders...but I can't get them to work..I ran 14 gauge wires to the gauges...I have a good ground..I turn the ignition on and the needles move up 3/16''..I installed the senders in the 1/8 pipe plug next to where the old temp sender was 3/8 pipe...I noticed another 1/8 plug on the front cover..I was told thats "reverse" pressure... ??gauges and senders are Livorsi...
#10
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: rebuilt trans dosn't work?
The 3/8 plug is the line pressure.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Thread
Thread Starter
Forum
Replies
Last Post
Wally
General Q & A
6
06-27-2006 08:22 AM
nauticaL ILLUSIONS
General Q & A
7
07-22-2003 12:16 PM