Tunell raaammm!!!!
#161
Registered
iTrader: (1)
#162
Registered
iTrader: (1)
Like kinda similar to Holley’s Snioer intake for the LS’s. Oh well.
The following 2 users liked this post by SB:
F-2 Speedy (12-28-2021), hogie roll (01-01-2022)
#163
Registered
#164
Registered
iTrader: (1)
The following users liked this post:
getrdunn (12-28-2021)
#165
Registered
could always buy some intake tubes and start tig'ing a manifold together.
https://www.williamsenginedesign.com/intake-runners/
https://www.williamsenginedesign.com/intake-runners/
#166
Registered
iTrader: (7)
could always buy some intake tubes and start tig'ing a manifold together.
https://www.williamsenginedesign.com/intake-runners/
https://www.williamsenginedesign.com/intake-runners/
Last edited by getrdunn; 12-28-2021 at 04:28 PM.
#167
Platinum Member
Platinum Member
iTrader: (1)
I wonder what the details on the 'Modified plenum chamber shown on manifold base 540-572" are?? I have extensively modified 500 efi manifolds, other than carrying hp on a 540 to 670/680 range flat to about 5600/5800 with a big torque tradeoff (but I never finished true testing of limits with a 9.5 or 10-1 engine). I have seen either a AZSM 500efi style upper with upper dividers removed in one random internet pic (or it was done by lingenfelter or innovation) but never seen anyone mention using one. Is this a pic from old advertising or something recent?
#168
Platinum Member
Platinum Member
iTrader: (1)
aside from the 500 lower I personally modified, first time Ive ever seen one like this, found it searching those images that were uploaded, I see it was something flagship offered from AZSM in 2009, havent ever seen it anywhere else and I dont think it caught on or maybe didnt work great. My testing with similar gave mediocre results, big tq loss but did carry rpms, hp higher, Smitty
#169
VIP Member
VIP Member
aside from the 500 lower I personally modified, first time Ive ever seen one like this, found it searching those images that were uploaded, I see it was something flagship offered from AZSM in 2009, havent ever seen it anywhere else and I dont think it caught on or maybe didnt work great. My testing with similar gave mediocre results, big tq loss but did carry rpms, hp higher, Smitty
Last edited by offshoredrillin; 01-02-2022 at 03:23 PM.
#170
Registered
I see Engine Masters mentioned on this thread and I’m a huge fan.
The guy that runs the dyno (sorry, don’t remember his name) often mentions motors he’s built for race boats, and I think specifically offshore.
Anyone know of him?
Seems like a very sharp dude.
He often catches what the other guys miss or are stumped by.
(Dulsich is also very sharp)
The guy that runs the dyno (sorry, don’t remember his name) often mentions motors he’s built for race boats, and I think specifically offshore.
Anyone know of him?
Seems like a very sharp dude.
He often catches what the other guys miss or are stumped by.
(Dulsich is also very sharp)