Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Scarab (https://www.offshoreonly.com/forums/scarab-41/)
-   -   Back from the Dead; '81 Scarab 38 Resto (https://www.offshoreonly.com/forums/scarab/336665-back-dead%3B-81-scarab-38-resto.html)

endeavour32 01-30-2018 04:56 PM


Originally Posted by Team Archer (Post 4607471)
Heath do me a favor bond the hull deck joint with an 8 inch wide 1708 tab you will be repairing the joint all the time if not we tab all of our hull and deck joints. Regards Dan keep up the nice work.

Dan-

Do you just tab it with 1708? I was going to use 5200 and glass it from the inside, as well as remove the wood insert that Wellcraft installed for the rub rail screws.

hblair 01-30-2018 08:53 PM

6 Attachment(s)
Got some more done tonight. Made a brace to hold the top of the hull then cut the front bulkhead out. It’s rotten on the bottom and was poorly installed anyway with the front tabs fiberglassed on top of epoxy paint. We cut out the small triangular floor piece in front of the bulkhead. Miraculously it wasn’t rotten, but the stringer under it was. I think this is as far forward as the rot traveled lol. We also cut out the rotten center stringer between the 1st and 2nd bulkhead which was the toughest thing we’ve done so far. We called it a night after that....

Attachment 574796

Attachment 574797

Attachment 574798

Attachment 574799

Attachment 574800

Attachment 574801

hblair 01-30-2018 08:57 PM

6 Attachment(s)
Attachment 574803

Attachment 574804

Attachment 574805

Attachment 574806

Attachment 574807

Attachment 574808

jeff32 01-30-2018 09:16 PM

Is there a bulkhead or stringer in that boat you did not replace?

hblair 01-30-2018 10:32 PM

Jeff are you calling my boat a rotbox? I am very offended. 😉 All bulkheads will be replaced and all stringers except the left one under the v berth, and about 20% of the two outer stringers under the cabin setees. Many of the small outer stringer braces are ok.

hblair 02-01-2018 08:29 PM

5 Attachment(s)
Prepped the hull for the #1 bulkhead tonight, and worked on getting the center stringer cleaned out. Have a ways to go there. In other news, I started pursuing finding the colors for the Miami vice theme even though we are a ways out. I borrowed an old DuPont chip book to get the original imron colors so I can cross it over to Sherwin Williams chips (which is what we spray) I think I have it all but the white and teal. I have...
44435 black effect
44493 dark violet effect
45024 green effect, and
7446 mariner blue effect
I’m good with coming up with my own white but need the code for the teal.

Attachment 574867

Attachment 574861

Attachment 574862

Attachment 574863

Attachment 574864

hblair 02-01-2018 08:31 PM

2 Attachment(s)
Attachment 574865

Attachment 574866

jeff32 02-01-2018 08:57 PM

Looking at pictures on page one, you have come a long way even if you are not up to paint at the moment! Not easy to find the right paint codes, but you seem to be in the good area of colors!
Playing this much with fiberglass, you should buy active thunder boat cie in florida just listed for sale!!!

rak rua 02-01-2018 09:04 PM


Originally Posted by jeff32 (Post 4608210)
Looking at pictures on page one, you have come a long way even if you are not up to paint at the moment! Not easy to find the right paint codes, but you seem to be in the good area of colors!
Playing this much with fiberglass, you should buy active thunder boat cie in florida just listed for sale!!!

Yeah, he's doing a great job. I think this is the best current thread on here.
Dont buy AT, flop a Scarab flat deck and put a classic back on the market. :)

RR

hblair 02-02-2018 02:02 PM

1 Attachment(s)
Thanks guys. I texted glassdave he didn’t have the code but he had the ppg formula. I believe this is the correct DuPont code. 94121 turquoise...

Attachment 574887


All times are GMT -5. The time now is 04:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.