Surprisingly only took 3 hours to sand the port hull side today. We’ll spray it with slick sand when we spray the instrument panel. The starbd side is rougher, it will take more time.


https://cimg2.ibsrv.net/gimg/www.off...9cbaf46c6.jpeg
https://cimg4.ibsrv.net/gimg/www.off...91c3d3f18.jpeg

Billy was caught up today so he put two coats of polyester on the port hull side. Haven’t sprayed the instrument panel or starboard hull side yet...


https://cimg6.ibsrv.net/gimg/www.off...9760489ee.jpeg
https://cimg7.ibsrv.net/gimg/www.off...723fc7598.jpeg
https://cimg8.ibsrv.net/gimg/www.off...d6e3a4211.jpeg

Oh wow !!! Really starting to take shape!

Looks great ! Nice job heath

Thanks guys, been sanding on the instrument panel, also Billy put three coats of black urethane primer on the windscreen/fairing(what are we calling this?)

also if anybody knows of an arch for a 38 I’m in the market for one. I posted this on Facebook. I need one just like this one I’m borrowing now from a friend. If I can’t come up with one I’ll have to make it.


https://cimg9.ibsrv.net/gimg/www.off...945cef04f.jpeg
https://cimg0.ibsrv.net/gimg/www.off...26d76f118.jpeg
https://cimg5.ibsrv.net/gimg/www.off...cb7f26b14.jpeg
https://cimg4.ibsrv.net/gimg/www.off...a54d4b715.jpeg

Radar arch
 

I have a very nice arch I pulled during a resto on a scarab 400, I’ll donate to your cause. My 400 is back in Fl waiting for me to get enough energy to replace the transom, it’s otherwise a very clean boat but looks better without the arch. The arch is in Priest River Idaho, you can have it but you need to arrange shipping.

Thanks a lot I'll get with you as soon as I can.

I tried to send you a private message hoodoo but it said your box is full.

I got the rest of the engine compartment bulkhead glassed in place. Also hole sawed for the fuel lines for the engines. Rik sent me some studs, drivelines (double ujoints) and a highly polished tie bar for my drives. I’ve also got the instrument panel ready to prime.


https://cimg0.ibsrv.net/gimg/www.off...ef4d09bf8.jpeg
https://cimg8.ibsrv.net/gimg/www.off...914422d0a.jpeg
https://cimg5.ibsrv.net/gimg/www.off...d95030758.jpeg
https://cimg6.ibsrv.net/gimg/www.off...4ed2cdbb7.jpeg

I know we’ve talked about this boat might have been a turbo boat in the past, we’ll I was going thru the gauges and wiring and noticed there are manifold pressure gauges in the instrument cluster. Correct me if I’m wrong but there would be no need for these unless it was a turbo boat? Thoughts? Opinions?


https://cimg9.ibsrv.net/gimg/www.off...d8bae7021.jpeg