Unfortunately I've gotten almost zero time to use, or work on for that matter, my boat this summer...so I haven't done the upgrade. In fact, I actually have my boat listed on boattrader now I do have two set of diverters if you are interested...they work perfect, I was going to clean them up and put them on ebay, but I haven't had time to do that yet either.

What all is required for the conversion?

I believe all you'll need is a set of diverters and a set of tips...and a big hole saw. From everything I've read there isn't much involved...I'm pretty mechanical though and I'm not scared of many jobs...some guys are scared at the thought of drilling two giant holes in the back of their boat...just make sure you measure about 8 times The only reason I haven't done it is because I haven't had any time to use the boat and now I'm selling it. I was dying to get it on there though...nothing sounds better than a big block w/ thru hull exhaust!

Do you have pics? What all is intailed in installing the diverter? What are you looking to get for the diverters?

Thanks again!

The diverters give you the ability to switch between the thru prop and thru hull exaust correct?

If you are interested, send me an email at [email protected] and I can send you some pics later tonight. They do allow you to switch between thru-hull and thru-prop, I'm looking to get $300 for a pair shipped.

ga1990 you got e-mail. Mine is [email protected]

Sorry it took me so long to reply...I've been pretty busy, I sent you a pic, let me know if you're interested.