MGD Performance
#291
As far as I know it is still for sale at MDG. What a sweet ride! I actually tried to work a deal on it last year, but the banks were not my friend!
. It is hands down my favorite Y2K! Hopefully Dave will be able to save it for me until the recession is over!
. It is hands down my favorite Y2K! Hopefully Dave will be able to save it for me until the recession is over!
#292
Registered
Joined: Jun 2005
Posts: 688
Likes: 2
From: Annapolis Md
I still have the y2k the boat is still for sale but not trying too hard to sell it,waiting for the economy to pick up a little selling a boat in this economy is a joke,thats why you see a lot of people selling there boat in parts.I will consider all real offers,super nice boat has about 15 demo hrs
#293
Charter Member #71
Joined: Oct 2000
Posts: 1,365
Likes: 0
From: Long Island,N.Y.
I still have the y2k the boat is still for sale but not trying too hard to sell it,waiting for the economy to pick up a little selling a boat in this economy is a joke,thats why you see a lot of people selling there boat in parts.I will consider all real offers,super nice boat has about 15 demo hrs
Hey Dave - remember me ? You sold me my Powerplay a while back....
If you get a chance, give my cell a call. 516 647 2596.
#295
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
I'm gonna give props to Dave at MDG for a minute . You all know this Y2K was sold to Jamie in Tampa who ran the hell out of it in a couple of Poker runs . Now Jamie who is a boat guy is not a motor guy .. Meaning he doesn't build motors or do major repair himself .. Then I bought the boat and I have to admit , I'm guilty too all I did was change the oil at fifty hours ,and drive the Hell out of it , nothing else . So now I decided to give it some love before the 4th of July weekend and I yanked the motor out , pulled the oil pan, checked the bearings , leak down , compression test , sanded and put fresh paint on it . And I have to say , the only thing I found wrong after 108 hours was a leaky intake gasket due to the bolts vibrating loose and, several other bolts loose ( again me neglecting to do basic maintenance ) and a little rust from the salt , and that was it ...
Got the boat back together and took it out all weekend , ran 90.4 with 3/4 of a tank of gas , my wife , four year old and two friends in the back seat ..
Need a motor built CALL DAVE AT MDG ...
http://www.mdgmarine.com/
Got the boat back together and took it out all weekend , ran 90.4 with 3/4 of a tank of gas , my wife , four year old and two friends in the back seat ..
Need a motor built CALL DAVE AT MDG ...
http://www.mdgmarine.com/
Last edited by OCCJoe; 07-06-2011 at 10:12 AM.
#299
Registered
Joined: Aug 2009
Posts: 1,697
Likes: 15
From: Cedar Point NC
Dave At what hour mark would you think the motor needs to come out of the Y2K . I don't know if it has lost any power or not . I took it to LKN in September and a friend of ours and her son were sitting on the back seat a took a pic of the speedo at 90 with five of us in the boat and a 1/4 tank ..
Is there any more power to be found in this motor and keep it NA ? I think another 150 will get me to the triple digit mark .
Is there any more power to be found in this motor and keep it NA ? I think another 150 will get me to the triple digit mark .
#300
Dave At what hour mark would you think the motor needs to come out of the Y2K . I don't know if it has lost any power or not . I took it to LKN in September and a friend of ours and her son were sitting on the back seat a took a pic of the speedo at 90 with five of us in the boat and a 1/4 tank ..
Is there any more power to be found in this motor and keep it NA ? I think another 150 will get me to the triple digit mark .
Is there any more power to be found in this motor and keep it NA ? I think another 150 will get me to the triple digit mark .




