|
https://cimg0.ibsrv.net/gimg/www.off...e122300e2.jpeg
Step for bilge goes on both sides of center stringer https://cimg1.ibsrv.net/gimg/www.off...4e88eaafe.jpeg Foot plates for both sides of dashes https://cimg2.ibsrv.net/gimg/www.off...1f79878e9.jpeg Gunnel plates for getting in and out of the boat https://cimg3.ibsrv.net/gimg/www.off...3d7303639.jpeg Dash logo for port side dash |
I know it’s been a slow process but getting all the fine tuned custom parts is so time consuming. Still working on swim platform all the supports are done and there working in the top piece. Going to be such a cool boat when done just taking my time and not rushing it. We did get the steps and dashes painted last week. The out side is all prepped. Hauling it to paint booth and pulling off trailer next week to wrap in primer sealer.
|
Those pieces came out bad azz!!! Looking forward to seeing those installed.
|
Thanks it’s all the small details that take so much time. We have all the colors picked out and the interior is already complete so once we get to a certain point it should start going together a lot faster.
|
Originally Posted by division1
(Post 4816684)
Thanks it’s all the small details that take so much time. We have all the colors picked out and the interior is already complete so once we get to a certain point it should start going together a lot faster.
|
Originally Posted by thisistank
(Post 4816690)
LOL, don't have to tell me. 2 years into a make-over on ours. :ernaehrung004:
|
Originally Posted by offshoredrillin
(Post 4816720)
rookie:lolhit:
|
I need one of these for the center of my swim platform, will your guy make one ?
https://cimg9.ibsrv.net/gimg/www.off...808c24c50.jpeg |
Pm me I’ll get you details
|
Originally Posted by division1
(Post 4816795)
Pm me I’ll get you details
|
Looking good. This will be a really nice unique piece when its done. I am in year 5 so this is fast in my world.
|
Thanks !!! I’m just taking my time not stressing over it its moving along. Painter came over and laid out all the logos to make sure it’s what we wanted it will get there lol.
|
Is it done yet? Are you boating now ?
|
Yep it’s all done. Boating as we speak. No but in all seriousness it’s at the paint shop and coming along really good
|
Dash panels made new gauges in hours upon hours of rigging and wiring will get picks up soon. I have to say it’s really nice doing the wiring from scratch tho you can really clean things up!
|
Looking forward to seeing some pics, perhaps a bit of video? LOL no pressure!!
|
Pics?
|
Any update?
|
Yes been real busy working on projects have definitely made some real good progress on it just haven’t been posting to much. Also did a lot of work on the hauler aka truck over the winter and also got a nice goose neck trailer for the boat with boxes and stairs since we’re going to be over the road a lot with it.
|
https://cimg2.ibsrv.net/gimg/www.off...07ee0bf25.jpeg
All clean up ready for hauling https://cimg3.ibsrv.net/gimg/www.off...7233888b6.jpeg New air ride https://cimg6.ibsrv.net/gimg/www.off...a6180612d.jpeg Turns out it burns diesel dual know 🤘 |
That truck is the cats azz!!!! So cool!!
|
Thanks the 10 speed fuller trans with low overdrive and 3.38 gear ratio it cruises 75 mph at 1450 rpm gets great fuel milage. And have low end gears for anything needed lol. Did a air ride front and rear suspension to lol.
|
I’ll get some boat pic up soon.
|
truck looks awesome!
|
Thanks it does the job really well matching gooseneck trailer will be Awsome for traveling. We have been taking a ton of trips in the yahama 242 we have can’t wait to travel with the gun when it’s done !
|
Ok kiddios back to our regularly scheduled program. I’m going to catch up on some post most of this stuff had been done for a while but I’ll post a few times a week till it’s cought up I don’t want to skip over stuff .
|
https://cimg1.ibsrv.net/gimg/www.off...35cfe6c28.jpeg
Door tracks and sliders https://cimg2.ibsrv.net/gimg/www.off...1dff4c877.jpeg Mounting tracks and sliders https://cimg3.ibsrv.net/gimg/www.off...054e80e74.jpeg 2x2 1/4 inch angle all through bolted in all areas drilled and taped for pods. https://cimg4.ibsrv.net/gimg/www.off...70aebafdd.jpeg Door mounted https://cimg5.ibsrv.net/gimg/www.off...73dca9c4c.jpeg Factory cigarette tracks and sliders |
This was the pod mounting and door track process. I’ll try to keep all the pics g rated this time lol.
|
https://cimg9.ibsrv.net/gimg/www.off...0c1290f1d.jpeg
Staring to look like something permanent mounting https://cimg8.ibsrv.net/gimg/www.off...c69a4a228.jpeg Gaps look good https://cimg1.ibsrv.net/gimg/www.off...44ae2aaaf.jpeg Fits snug and tight left a 1/4 all the way around so there no poping noise when your running across the ruff stuff |
|
Coming along, looks good
|
https://cimg6.ibsrv.net/gimg/www.off...c64041dc1.jpeg
575s got some spice added to them https://cimg8.ibsrv.net/gimg/www.off...5162f9176.jpeg https://cimg0.ibsrv.net/gimg/www.off...2267d8afc.jpeg More wind |
So what’s the best place to mount the water pick ups on a notched topgun and what ones do you guys suggest .
|
Originally Posted by division1
(Post 4838093)
So what’s the best place to mount the water pick ups on a notched topgun and what ones do you guys suggest .
https://teaguecustommarine.com/plumb...ble-water-pick |
Originally Posted by Griff
(Post 4838099)
To get the best flow, they'll need to be mounted under the notch to the sides of the drain plug.
https://teaguecustommarine.com/plumb...ble-water-pick |
nice
|
nice
|
Spent the last 2 weeks on the trailer. All new bunks welded all the old light holes shut and all the screw holes . Sand blasted primed and painted. Drilled all new 3/4 round clear leds in it. All new wiring polished the wheels ect. Made it road worthy again from sitting a few years. Luckily it was in nice shape so wasn’t to bad. Just had some resin and filler on it from the last few years . Good as new know !
|
https://cimg7.ibsrv.net/gimg/www.off...977c1fcd0.jpeg
Last repair lol up front on the bow at the bottom few stress cracks decided to no cut corners and leave for a later time ground out used 2oz and epoxy. Some good filler ands gel this weekend then shooting front half of bottom with epoxy primer and craft 2000 Sunday. Not bottom running surface due to it being blue printed. https://cimg8.ibsrv.net/gimg/www.off...30a8666db.jpeg https://cimg0.ibsrv.net/gimg/www.off...66d2e166d.jpeg https://cimg1.ibsrv.net/gimg/www.off...3db7216ff.jpeg |
https://cimg0.ibsrv.net/gimg/www.off...77c9d6b5b.jpeg
Bought one of those polishers for truck wheels seems to work good! Have to have a pretty tow rig! https://cimg1.ibsrv.net/gimg/www.off...c93c38ba2.jpeg Nothing beats bay point nights ! |
| All times are GMT -5. The time now is 09:13 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.