Dave Here I found the boat advertised.

http://www.planetyacht.com/detail.php?id=288

Steve, I was in Kuwait at the end of the summer and fall of 1992, right after the war. We were doing some work to help the Kuwaits reinstate their infrasturcture and were working in a yard right off 6 ring road. You are right about there not being much over there to work with, the Iraqi's even took the seats out of the soccer stadium!

Just want you to know that this thread, the Powerplay thread and one GlassDave did on a Skater makeover has actually forced me to give money to this forum. You guys can almost convince me that glass work is fun. Almost.

Thanks guys!

Dan

Sir Thanks for the kind words,It is all about the love for the boats.

wow, that thing is pretty cool. Its just mind bending the forces that are on a mast that size. Amazing piece for sure.

A friend built the mast ,Jim Gardner and he gave me some work doing the modifications .

Dave that wide rolling platform here is the key to it: there were 4 of these wheel sets which rode on the Pipe rail. I used home depot hard rubber wheels welded to some steel angle here is a set I pulled from the scrap out back that were cut off.

ttt

+1


Hi Steve hey did you get a chance to look into Diab's line of products and see what foam they have is comparable to the 6lb Airex that was used in the Talon race boat i have to fix? Is Airex still available? Just looking at my options. Thanks

airex is available

http://www.corematerials.3acomposite...rex-foams.html

corecell will prob be easier to find though.......

This is what was used to build the hull of the 124' 60kn Ermis2.