Several items:

1 - Poker Run for "The Boat Club" in Clear Lake this Sat, after the storm levels Brownsville.

2 - GOOD JOB Boatman22 for fending off rabid fishermen

3 - When in hell is the "Great Conroe Challenge" I'm tired of waiting

4 - Thanks to everyone involved for a truly enjoyable Poker Run

5 - Does anybody need any spare money? I've got lots of it coming in soon

I don't need your hand outs......oh wait.......yes I do.:drink:

I need eleventy hundred dollars that I can pay back in elevnty thousand instalments.

its kind of like a $430 for the payment and $140 a month storage bill, raise each month... and you ride with everyone else and take a little abuse about not owning a boat from people who own boats that don't run... so not so bad:evilb:

you keep the money...... just give me the baby!!!!:drink:

When is the wiring guru heading over to the Stultz Ranch???

which boat is being worked on first.... bananna boy sent me a message yesterday, but said he was leaving to go out of town... can't do it tonight, but could prob squeeze someone in wed/thur evening, or maybe this weekend

Sutphen will be first. Not much going on there, just some loose ends to wire. Just let me know when you want to come look at it so we can see where we need to go from there, and what I need to get for you to start.

Can Smooth be worked in the mix????the electric chitter does not work....

Not much of a challenge, I had 9 people on the boat and 3/4 of fuel......and still walked him down....


Brett @ BBlades asked me if I ran with that full all the time.....thought I should stay with the 30's :ernaehrung004:

are you talking about your macerator??? or do you even have one.. never seen a power boat one that was hooked up, most of them were never hooked up and people bypassed them to just dump overboard

this is some good photo shop

http://www.offshoreonly.com/forums/s...d.php?t=191315

did you tell him that runnin full was not usually an issue with you:evilb::angry-smiley-038::evilb:

no, I have a eletric vacuum chitter, its not getting power for some reason.

It can dump in the tank or overboard..


Smooth's electric grimlins

1) All three drives up and down with the All in One switch

2) Tabs

3) what battery is going to what perko

But put me in line behind Wstultz but in front of Trojan-man:ernaehrung004:

I'm thinking of getting his props too. Which did you get and do you like them?

all of those are simple without looking at them except for the head, i'll just have to see it

Bravo 1 30 pitch 4 blades, will work for now, He wants me to put some more time on them and then build a custom set:cool:

cool just let me know what poision you want to drink:ernaehrung004:

his nickname on base is cum guzzler?!?! what do you think he likes to drink....

I have a Brand new 30P Bravo 1 R with hub, if anybody needs one. I'm looking for a set of 26P to try. I'm only getting 5000 rpm out of my 28P's so I think 26P will get me to 5400rpm's.

What you going to do with your 28s

I have a set of 26P four blades that belong to Brian. One blade has a crack in it that will have to be welded up first. I can ask him for you if you want to try them.

I suggest you guys call Brett at BBlades, his knowledge on boats and set ups is well worth the time of the phone call. Also he will loan you props for $25.00 a prop plus shipping. I feel he nailed my rig first time. I went ahead and purchased the props, he thinks I will see more RPM's when it cools down and I run a lighter load. It handled 100 times better than my old props that had been worked on 10 to many times.

Apparently Brett is real busy working on your rig because he doesn't seem to have the time to return my e-mails or phone calls.

I just sent a video of you to tom a few minutes ago:grinser010:

I will let him know its ok to call you that you are one of my boys......:cool::cool:

I am sure it went like this......



hello my name is Susan thanks for calling BBlades how may I help you?

WStultz: hello susan my name is Wade may I speak to brett?

Susan: You sure can Wade may I get some info from you?

WStultz: You sure can Susan I have a 1966 26 ft Stuphen with 350's with Alpha drives.....


Susan: you have what????


WStultz: I have a 1966 26 ft Stuphen with 350's with Alpha drives.....

Susan: this is a boat???

WStultz: yes its an old school wave crusher....can I just speak to Brett???????

Susan: please hold

Brett: click

Wstultz hello????hello???

Wstultz second call

Susan: hello thanks for calling BBlades how may I help you?

WStultz: yeah this is Wade I think we got disconnected, may I speak to brett??

Susan: Oh hello Wade, no you may not speak to brett, here is the number he thoought could help you.

Wstultz: a different number??

Susan: Yes Wade do you have a pen and paper ready? I can wait

Wade: yes I do....umm...ummm

Susan: 1-800 TOYS R US followed by a click sound...

Wade: Hello....helllo????

:ernaehrung004::ernaehrung004::ernaehrung004:

I want to try the 30 on the Magnum.

Hey Boat*****, I'll pay to fix the Wiring in the Magnum. I even have the old wiring diagram that came with it that is drawn in crayon on an old cocktail napkin. Just let me know when you can get going.

there you go mush mouth, we had him working for drinks and you go and phuck it up for the rest of us offering money......what a d!ck...that storm has not hit yet........:food-smiley-007:

Being that it's new I want to sell it as new. If it was used i would have no problem letting you try it out.

If the 26P's work I'll sell the 28P's

Same here I sent him an email last week with all the info he asked for on his website.....

Have you seen his bar tabs? Money is cheaper.

I can wait until after smooth though, but as long as I am before Trojan Man.

That is funny, because when I call get on the phone so he can talk to me personally. :cool:

Yeah, because you can tell if a prop has been used or not? :Whatever:

I will let him know you are one of my boys as well.......:party-smiley-004:

How did you end up with one prop?

copper is expensive... do you have any idea what it would cost to string a wire from one side of that tub to another:angry-smiley-038:

Thought with the new motors I would need 30P's . Bought a new 30p on ebay, and was looking for the other. i can't get the rpm's with 28's so 26P it is.