Originally Posted by Trojan-man (Post 2850556)

There was more to in than that. I talked with charly jr at the miami show and he told me Acrylico told him they didn't want to make my stuff and ship it because they didn't want to have to deal with adjustments if it didn't fit. Now that the boat is there, that problem will be eliminated. The fault lies with the lexan company and not the banana guys, they have done everything they told me they were going to do thus far.

Spk1 and Rob needed a truck to get back to miami so it all just worked itself out naturally. Now I can book a 1 way ticket, sip some bushwhackers for a few days on the beach and have a nice 1 way joy ride home :ernaehrung004: oh and thank you spk1, I owe you a brewsky

Originally Posted by Trojan-man (Post 2850540)

:evilb::evilb::evilb: hes been driving around with that for about 3 days now :cool:

Originally Posted by spk1 (Post 2850715)

But its ok tbone,, as bad as you may have made me look when I said my buddy at land rover can find any car anywhere for one hell of a price, not calling me back,, the guys at the dealership in florida couldnt find the key to the one they had in their show room, :evilb: ,, so your in luck the guy is still looking, just fyi, the guy told me last month he was looking for a 60 hatteras like ours,, I put my friend rob on it,, and that deal closed 2 weeks ago at $350,000. So they guys a buyer,,

Originally Posted by boatman22 (Post 2850317)

Complete kit 44.60 with discount

Originally Posted by boatman22 (Post 2850835)

Ryan the Houston warehouse is out. They said that they should have today(truck due)......So....I can't have them today.....

Originally Posted by BY U BOY (Post 2850934)

Tom do you have the tool to install the bellows on a bravo?Also I need the seals for the steering pin.The screw in plastic thing that holds the water pick up house in the helmet,and a box of naked lay tees. Let me know what you have. Also I need to borrow your alignment tool.

Originally Posted by jeff1000man (Post 2850937)

Damn man. They built Rome in a day!! :grinser010: What is taking so long?

Originally Posted by jeff1000man (Post 2850937)

Damn man. They built Rome in a day!! :grinser010: What is taking so long?

Originally Posted by BY U BOY (Post 2850934)

Tom do you have the tool to install the bellows on a bravo?Also I need the seals for the steering pin.The screw in plastic thing that holds the water pick up house in the helmet,and a box of naked lay tees. Let me know what you have. Also I need to borrow your alignment tool.

Originally Posted by boatman22 (Post 2850992)

The rep is are here unpacking stuff, I don't know where anything is. Have you got any part#'s. No problem on the tool.

Originally Posted by BY U BOY (Post 2850999)

10-807204
11-82671323
12-85344
12-861854
11-98533
12-98548
41674
25-48171
25-62705

No part # on the steering pin seals
Adn I don't really know what the part number for the bellows install tool is either. I know I'm no help:drink:

Originally Posted by boatman22 (Post 2851051)

The install tool they don't have......here is what I can get for tomorrow:

HOU710-4167411 INSERT WATER TUBE PICK UP IMBEA$1.67
HOU710-11-9853311 NUTEA$1.78
HOU710-12-8534411 WASHEREA$1.20
HOU710-12-9854811 STEERING LEVER WASHER-LOWEREA$3.42
HOU710-25-4817155 O RING @5 - Order in multiples of 5EA$0.93
HOU710-25-6270522 O RING @2 Order in multiples of 2EA$0.89

Originally Posted by jeff1000man (Post 2851087)

Parts order under $10 fee. $100. :evilb:

Originally Posted by BY U BOY (Post 2851090)

Thats like your 1800.00 transome assembly.:party-smiley-004:

Originally Posted by jeff1000man (Post 2851097)

I didn't tell you that much. I said 1500, which is pretty fair I thought considering you would be finished by now.

Originally Posted by jeff1000man (Post 2851097)

I didn't tell you that much. I said 1500, which is pretty fair I thought considering you would be finished by now.

Originally Posted by Trojan-man (Post 2851120)

$1500 for a complete transom assembly is very fair. After trying piece together one, the parts cost way more than you can get a decent assembly for.

Originally Posted by wstultz (Post 2851145)

There were two for sale the other day for $900 each. Newer assymblies that looked good and came off of a fresh water boat.:food-smiley-007:

Originally Posted by jeff1000man (Post 2851162)

Thanks captain co(k block :angry-smiley-038:

Originally Posted by BY U BOY (Post 2851115)

BM22

I think these are the part numbers for the steering shaft seals.
26-8m2005029 X2
23-98357
23-98356
can you check on those also.

Originally Posted by boatman22 (Post 2851203)

On a better note, received this email from CP:

Tom, I was given the go ahead with your dealer application. Your dealer number is 39***, I will be mailing you our catalog.:evilb:

Originally Posted by jeff1000man (Post 2851211)

How bout these? I am getting TMR logo enlarged, but that is the last change since they have to go to print to be ready for sat. We can only do 1 color and get them out in time, so we are going with the old reliable black on white.

Originally Posted by wstultz (Post 2851216)

Nice. What's hanging out of the boat?

Originally Posted by boatman22 (Post 2851202)

Don't have.......

Originally Posted by Rcolter (Post 2851218)

Looks ok for last min. How much extra is it to get them on a BeefyT shirt?