Happy New Year, glad all I can afford is a little boat. This is an incredible project you have undertaken.
Rick

"Kirk to engine room"
"Scotty here captain"
Give us 105percent on the warp drive!!!!
I don't know if shell handle it some Knot Right used car salesman overhauled them!

Im all in ORTHO!

Whaz up?
Hows the good ole Hustler running?

Here is a shot of the new 703 sealing ring this directs the compressor air into the first gp rotor. Notice the little louvers to direct the air
I grabbed this one off Egay
The guy bidding with me was the guy that was going to sell a new one to me for 3 times as much.
What a country.

flip side of old and new versions

this is item 2

LOTO boy that would be just FAB heard it's as much fun as K.W. The new brake discs look mighty fine and certainly should do the trick. Do you have space to add another caliper and double the pinch? What a huge difference in the 703 sealing rings.

here are the modified oil seal housings notice all the holes to direct the
compressor air this is under the sealing ring shown above.

the one on the left is the 703 version the right is the 13b.
flip side

here is the illustration
this is the housing to the far right not numbered

NEWS FLASH
Jim just sent these sensitive photos from Principle propulsion systems in Arizona. AKA PPS.

this shows items 3,4,5 on the illustration above post 365