Just Turbines
11-14-2013, 04:36 PM
#91
Registered
Thread Starter
11-14-2013, 04:39 PM
#92
Registered
Thread Starter
11-14-2013, 04:40 PM
#93
Registered
Thread Starter
ok here some more stuff
the jack screws could have been longer.
[IMG]
[/IMG]
the jack screws could have been longer.
[IMG]
[/IMG]
11-14-2013, 04:42 PM
#94
Registered
Thread Starter
Wow look at all the cool planetarys
[IMG]
[/IMG]
[IMG]
[/IMG]
11-14-2013, 04:44 PM
#95
Registered
Thread Starter
ok now we will inspect the gear faces looking for a 15thousands or deeper voids chips or missing teeth.
[IMG]
[/IMG]
[IMG]
[/IMG]
11-14-2013, 04:46 PM
#96
Registered
Thread Starter
im no gear head but they appear to look real good with just some slight marking.
nothing you can really feel with a small pick.[IMG]
[/IMG]
nothing you can really feel with a small pick.[IMG]
[/IMG]
11-14-2013, 04:47 PM
#97
Registered
Thread Starter
looks like two stages of reduction[IMG]
[/IMG]
[/IMG]
Last edited by KNOT-RIGHT; 11-14-2013 at 06:37 PM.
11-14-2013, 04:53 PM
#98
Registered
Thread Starter
going back to this look behind the sun gear you can see inside the accessory gears
those are running the accessory gear box.
The gear is also there to run the top mount accessory.
those are running the accessory gear box.
The gear is also there to run the top mount accessory.
11-14-2013, 04:54 PM
#99
Registered
Thread Starter
ok i its miller time!!
11-14-2013, 06:34 PM
#100
Registered
Thread Starter
here is a page out of the army intermediate maintenance manual showing some of what is acceptable
Last edited by KNOT-RIGHT; 11-14-2013 at 08:29 PM.
